ELECTRIC POWER STEERING
Kawasaki’s high-grade electronic power steering (EPS) system works best when you need it the most while at slow speed and when stopped. By turning the wheel, a signal is sent to the EPS ECU, initiating assistance. The ECU uses input from a vehicle speed sensor and torque sensor to determine the amount of steering assistance required from the system’s electric motor. Assistance is greatest at slow speed or when stopped and assistance is reduced as vehicle speed increases to ensure responsive steering. The EPS system also enhances ride comfort and control by acting as a damping system. The inertia of the electric motor significantly reduces kickback to the steering wheel caused by shocks to the wheels.
TILT STEERING
The steering wheel has a stepless range of approximately 40º, allowing drivers to set its position to suit their preference, as well as lift it out of the way to facilitate getting in and out of the vehicle.
DIGITAL INSTRUMENTATION
A multi-function display with white backlighting is built into the dash. A wide-range of features include: digital speedometer, digital fuel gauge, odometer, hour meter, clock, dual trip meters, 2WD/4WD indicator, parking indicator, water temperature warning indicator, CVT warning indicator, CVT temperature warning indicator, EPS warning indicator, neutral indicator light, reverse indicator light, and oil pressure warning light. A seatbelt-use reminder lamp comes on for eight seconds after the engine is started to remind the driver to buckle up. After eight seconds, the lamp continues to flash if the driver’s seatbelt is not fastened.
STORAGE
Ample storage can be found across MULE PRO 1000 series models. The passenger-side glove box provides enclosed storage for smaller items, while three dashboard pockets (left, center, right) provide additional storage. The center pocket is large enough to accommodate the accessory audio system. Two drink holders can be found built into the bodywork in front of the dashboard. MULE PRO-FXT 1000 and MULE PRO-FXR 1000 LE models offer two additional drink holders on the floor, located just below the center console. The six-passenger MULE PRO-FXT 1000 has two more drink holders for rear passengers that are positioned at knee height. A storage bin can be found under the driver’s seat and offers convenient storage while a steel plate helps protect it from rocks and hard hits. A second storage bin under the center passenger seat offers additional covered storage on the MULE PRO-FXT 1000 Platinum Ranch Edition and MULE PRO-FX 1000 HD. A small-item storage pocket for rear passengers that is positioned to the left of the cup holders can be found on the MULE PRO-FXT 1000.
Two DC sockets integrated into the dashboard provide a power supply (up to 120 W) for accessory items or personal devices. Two additional DC sockets are available on MULE PRO-FXT 1000 models for rear-passenger use.
STYLING
All models now feature a front face based on that of the MULE PRO-FXR, including quad headlights. This new serious look reflects the vehicle’s ability to perform at work sites and in moderate recreation environments. Select models feature painted/colored parts and all models come with a silver Kawasaki emblem that adds to a high-end, premium image. The new front face is protected by a steel front bumper that has been painted black for a tough look.
The compact 35W outer headlights are compemented by LED inner headlights and cut a bright path through the dark. Further adding a high-quality touch for all models is a new grille badge with a 3D Kawasaki logo on the grille cover. An aggressive tire pattern adorns each of the models, contributing to the tough looks. A clean dashboard design features switches for the headlights, selectable 4WD and rear differential lock, and additional spaces for accessory switches.
